How to choose the edge banding machine

1. The purchase of the edge banding machine mainly depends on the shape characteristics of the workpiece to be processed and the type of the edge sealing material, and also considers the problems of productivity and quality.

2, straight edge sealing is often used in office furniture and cabinets and other simple products, the configuration is mainly to consider the increase in output and some functions, such as PVC or ABS and other edge-sealing materials need to add a scraper device; It is necessary to increase the roughing device; in order to ensure that the sealing quality is not affected by the low temperature in winter, it is better to choose an edge banding machine with a preheating device; there are many other optional additional options, such as automatic tracking of the rounded trimming function. Milling cutters, etc.

3, curve edge can be processed in several ways. At present, most manufacturers use manual edge banding machines to machine curved parts, especially plate parts with inner arc. The diameter of the edge banding wheel will determine the maximum curve depth that can be processed. The use of a manual edge banding machine to seal the edges has the characteristics of simple operation and low investment.

4. Generally, the manual edge banding machine and the automatic linear edge banding machine can meet the requirements of general products, and at the same time, the products with only straight edge sealing will also improve efficiency and reduce production cost.

5. It can be seen from the above analysis that when purchasing and using the edge banding machine, attention should be paid to the product output and the ability to adapt to the market demand, so that equipment with different degrees of automation can be selected and combined.